Nylon Coil Zippers for Workshop and Manufacturing Use
_8-1-100x100.webp "68 cm / 26.772 in T10 #5 Black Nylon Open-End Separating Jacket Zipper – ZPS0068T10")
-1-100x100.webp "Red and White Striped Navy Blue Fabric Nylon Zipper T10 - SRTNYLKBT10")
_7-1-100x100.webp "50 cm / 19.685 in T5 Blue Nylon Coil Closed-End Zipper for Bags and Pockets – ZP0050t5M")
_9-1-100x100.webp "50 cm / 19.685 in T5 Brown Nylon Coil Closed-End Zipper for Bags, Pockets and Wallets – ZP0050t5K")
_1-1-100x100.webp "70 cm / 27.559 in T10 #5 Black Nylon Open-End Separating Jacket Zipper – ZPS0070T10")
_7-1-100x100.webp "74 cm / 29.134 in T10 #5 Black Nylon Open-End Separating Jacket Zipper – ZPS0074T10")
-1-100x100.webp "160 cm 62.99\" White Abaya Zipper | Open-End Long Garment Zipper | ZP00160T5")
Nylon Coil Zippers in Workshop Production
Nylon coil construction can be adapted to several zipper formats. The same chain family may be used as a short closed-end trouser zipper, an open-end jacket zipper or continuous chain for bags and cases.
Manufacturing approval should consider the chain profile, tape, slider, end system, seam construction and repeated opening performance.
Selection by Production Area
| Production Area | Zipper Approach | Workshop Check |
|---|---|---|
| Trousers and skirts | Short #3 closed-end zipper | Match the fly or garment opening. |
| Bag and equipment case | #3 or #5 ready-length / continuous zipper | Test curves and slider direction. |
| Jacket and vest | #5 open-end separating zipper | Approve the bottom box, insertion pin and front length. |
| Dress and formalwear | Invisible coil zipper | Check tape visibility and seam appearance. |
| Sportswear and technical apparel | Reverse-coil or coated zipper | Test the coating and sewing process on the real fabric. |
| Abaya and long outerwear | 100–160 cm / 39.37–62.99 in open-end zipper | Select a verified two-way system only when lower opening is needed. |
Spiral Coil Construction
A continuous spiral element forms the working chain on a nylon coil zipper. Smooth operation depends on accurate alignment between both coil sides and the channel geometry inside the slider.
#3 and #5 Production Comparison
| Feature | #3 Coil | #5 Coil |
|---|---|---|
| Turkish product family | Type 5 | Type 10 |
| Chain appearance | Lower profile | More visible profile |
| Typical products | Wallets, pockets, trousers, cushions and light bags | Bags, cases, jackets, coats and long outerwear |
| Slider requirement | Must match the actual #3 chain | Must match the actual #5 chain |
Standard Coil Zippers
Standard coil zippers display the spiral chain on the face of the zipper. They can be used for pockets, bags, jackets, cushions and general textile closures.
Reverse-Coil Zippers
Reverse-coil construction turns the spiral toward the reverse face and can create a cleaner visible tape line. It may suit sportswear, technical apparel and modern bag designs.
Reverse coil does not identify the end type or slider count. Closed-end, separating and two-way properties must be specified separately.
Invisible Coil Zippers
Invisible zippers also use coil construction, but the coil is folded behind the tape so that it can remain concealed inside a garment seam.
Metallic-Look Coil Finish
A metallic finish can be applied to the visible surface of a nylon coil. The zipper may resemble metal while retaining a nylon spiral chain.
Metallic-looking coil must not be described as genuine metal teeth.
Open-End Production Checks
On an open-end coil zipper, the insertion pin must enter the retainer box fully and both tape halves must remain level before the slider is raised.
Open-end or separating describes complete tape separation. It does not automatically describe a two-slider or lower-opening zipper.
Coated Coil Zippers
TPU- and PU-coated coil zippers may be used in technical garments, outdoor bags and equipment cases where reduced surface-water entry is desired.
Do not claim that a coated zipper makes the finished product completely waterproof without testing the complete construction.
Pre-Production Inspection
- Does the functional length match the pattern?
- Does the chain profile create unnecessary bulk?
- Does the slider run without excessive force?
- Does the chain reopen behind the slider?
- Does the insertion pin enter the retainer box correctly?
- Does reverse-coil tape suit the design?
- Does the metallic or coated finish remain stable through sewing?
Common Manufacturing Errors
- Do not match chains and sliders from the nominal number alone.
- Do not describe reverse coil and invisible zippers as identical.
- Do not describe every separating zipper as two-way.
- Do not describe metallic-looking coil as genuine metal.
- Do not claim full waterproof performance without testing.
- Do not approve long open-end zippers without a garment sample.
- Do not select replacement products from length alone.
Frequently Asked Questions
Where are nylon coil zippers used?
They are used in garments, bags, wallets, pockets, cushions, cases, jackets, long outerwear and technical textile products.
Should a workshop choose #3 or #5 coil?
#3 provides a lower-profile chain, while #5 provides a more visible profile. Approve the final choice from the product pattern and fabric.
What is the benefit of reverse-coil construction?
It places the spiral on the reverse side and can create a cleaner front-facing zipper line.
Is an invisible zipper a coil zipper?
Yes. It uses coil construction, but the chain is prepared to remain concealed inside a garment seam.
Is metallic-look coil made from metal?
No. The chain remains nylon even when its visible surface has a metallic finish.
Does every open-end coil zipper have two sliders?
No. Two-slider and lower-opening operation must be verified as a separate two-way or combi feature.
Last updated: July 22, 2026
Business: E-Zippers — zipper, slider and textile accessory supplier, Istanbul, Türkiye.
-1-350x450h.webp "Red and White Striped Navy Blue Fabric Nylon Zipper T10 - SRTNYLKBT10")
-1-350x450h.webp "Red and White Striped Navy Blue Fabric Nylon Zipper T10 - SRTNYLKBT10")
