Durable Tailoring and Alteration Zippers Variety
_9-1-100x100.png "47 cm T10 Open-Ended Nylon Zipper – Separate Model for Jackets, Coats and Outerwear - ZPHSN0047T10")
-1-100x100.png "120 cm 47.24\" Abaya Zipper with Special Puller | Open-End Long Garment Zipper | PR00120T10")
-1-100x100.png "Nylon Pocket Zipper with 12 cm Bottom - NC0012T5")
-1-100x100.png "37 cm (14.57 in) #5 Nylon Coil Closed-End Zipper for Jacket Pockets and Bags ZPHSN0037T10")
-1-100x100.png "19.3-inch #6 Crocodile Pattern Molded Plastic Zipper, Separating, for Jackets and Coats | PR0049T6TMS")
-1-100x100.png "4 Inch Nylon Pocket Zipper with Stop - NC0010#3")
-1-100x100.png "160 cm 62.99\" White Abaya Zipper | Open-End Long Garment Zipper | ZP00160T5")
Tailoring and alteration work requires matching the replacement zipper to the actual length, end construction, tooth type and application. This category includes short pocket zippers, jacket zippers, long outerwear zippers, invisible zipper sets and selected repair-oriented accessories.
What You Can Find Here
- Short pocket and fixed-bottom zippers
- Jacket and short-coat separating zippers
- 100–160 cm long outerwear zippers
- Invisible zipper sets
- Workshop and repair sets
- Selected sliders and companion parts
Measure the Working Closure
For replacement work, measure the active zipper line rather than the full fabric tape. Separating and closed-end zippers should also match the original end construction.
Why End Type Matters
Jacket and long outerwear fronts often require separating zippers. Trousers, pockets, dresses and bag compartments usually use a fixed-bottom or closed-end construction. The correct length with the wrong end type is still the wrong zipper.
Compare Tooth Construction
Nylon, molded plastic, metal and invisible zippers are different systems. Match the original zipper as closely as possible. Browse Zipper Types for broader product families.
Long Outerwear Zippers
Long ready-length options such as 100, 120 and 160 cm require accurate measurement because even a small difference can change the finished position at the hem or neckline.
Slider Replacement
If the teeth and tape are intact, replacing only the compatible slider may be possible. Browse Zipper Sliders for relevant options.
Frequently Asked Questions
How should I measure a replacement zipper?
Measure the working zipper line, not the full tape.
Are jacket and trouser zippers the same?
Usually not.
How do I choose a long outerwear zipper?
Match both the measured opening and the required end construction.
Can only the slider be replaced?
Sometimes, if the chain and tape are still in good condition and a compatible slider is available.
Where are invisible zippers used?
They are commonly used where the closure should remain visually discreet, such as dresses and skirts.
-1-350x450h.png "4 Inch Nylon Pocket Zipper with Stop - NC0010#3")
-1-350x450h.png "Nylon Pocket Zipper with 12 cm Bottom - NC0012T5")
-1-350x450h.png "120 cm 47.24\" Abaya Zipper with Special Puller | Open-End Long Garment Zipper | PR00120T10")
-1-350x450h.jpg "120 cm 47.24\" Abaya Zipper with Special Puller | Open-End Long Garment Zipper | PR00120T10")
-1-350x450h.png "120 cm 47.24\" Reversed Abaya Zipper | Clean Long Garment Style | ZP00120S")
-1-350x450h.png "120 cm 47.24\" Reversed Abaya Zipper | Clean Long Garment Style | ZP00120S")
-1-350x450h.png "160 cm 62.99\" White Abaya Zipper | Open-End Long Garment Zipper | ZP00160T5")
-1-350x450h.jpg "160 cm 62.99\" White Abaya Zipper | Open-End Long Garment Zipper | ZP00160T5")
-1-350x450h.png "37 cm (14.57 in) #5 Nylon Coil Closed-End Zipper for Jacket Pockets and Bags ZPHSN0037T10")
-1-350x450h.jpg "37 cm (14.57 in) #5 Nylon Coil Closed-End Zipper for Jacket Pockets and Bags ZPHSN0037T10")
-1-350x450h.png "18.50 in T6 Alligator-Tooth Molded Plastic Separating Zipper PR0047T6TMS")
-1-350x450h.jpg "18.50 in T6 Alligator-Tooth Molded Plastic Separating Zipper PR0047T6TMS")
_9-1-350x450h.png "47 cm T10 Open-Ended Nylon Zipper – Separate Model for Jackets, Coats and Outerwear - ZPHSN0047T10")
-1-350x450h.png "19.3-inch #6 Crocodile Pattern Molded Plastic Zipper, Separating, for Jackets and Coats | PR0049T6TMS")
-1-350x450h.jpg "19.3-inch #6 Crocodile Pattern Molded Plastic Zipper, Separating, for Jackets and Coats | PR0049T6TMS")
-1-350x450h.png "Waterproof 7-Piece Zipper Set – For Outdoor, Jackets, Bags and Technical Textiles - ST-0004T5")
-1-350x450h.png "Waterproof 7-Piece Zipper Set – For Outdoor, Jackets, Bags and Technical Textiles - ST-0004T5")