Filter

Molded Plastic Zippers for Workshop and Manufacturing Use

Molded Plastic Zippers in Manufacturing

Molded plastic zippers are selected when a visible, individually defined tooth profile is required. Their performance depends on tooth geometry, tape construction, slider channel, bottom hardware and the finished-product sewing method.

Despite the Turkish trade name “bone zipper”, the elements are manufactured from plastic resin rather than natural bone.

Selection by Manufacturing Area

Manufacturing Area Zipper Approach Production Check
Jacket and vest Open-end standard molded zipper Test the insertion pin, box and centre-front length.
Coat and long outerwear Long open-end or verified two-way molded zipper Two sliders are required for lower-opening functionality.
Outerwear pocket and bag compartment Short closed-end molded zipper Confirm the actual opening and slider direction.
Decorative fashion product Crocodile-tooth or metallic-look zipper Approve finish consistency on the production sample.
Tent, tarp and technical cover Heavy continuous molded chain Plan reinforcement, corners, sliders and end finishing.

Plastic Material Description

Product specifications should use clear material descriptions such as:

  • Molded plastic teeth
  • Injection-moulded plastic elements
  • POM plastic teeth — only where confirmed
  • Metallic-look molded plastic teeth

Natural bone, genuine metal and molded plastic must not be listed as the same material.

Closed-End, Open-End and Two-Way Functions

A closed-end zipper remains joined at the bottom and may be used for pockets, bags and accessory closures.

An open-end separating zipper allows both tapes to detach through the insertion-pin and box system. It is used for jackets, coats and vests.

A two-way separating zipper has two separate sliders and allows the lower section to open. It must not be confused with an ordinary one-slider separating zipper.

Crocodile-Tooth Molded Zippers

Crocodile-tooth describes a visibly larger or patterned molded tooth. It can be used as a design detail on fashion outerwear, sports jackets, coats and statement accessories.

The decorative profile does not provide a verified strength classification by itself. Strength and performance must be tested on the actual zipper.

Metallic-Look Molded Zippers

Metallic-look zippers create the appearance of gold, silver, brass, copper, antique or black metal while retaining a molded plastic tooth structure.

These products should remain within the molded plastic category and should not be filtered as genuine metal zippers.

Ready-Length and Continuous Chain

A ready-length zipper includes the slider and prepared end construction. It can be installed on standard jacket, coat, pocket or bag patterns.

Continuous molded chain is cut during production and still requires compatible sliders and secure end finishing.

See chain products in the continuous zipper-chain category.

Slider Compatibility

Molded-tooth sliders must match the actual tooth height, width and geometry. Turkish Type 5, Type 6 and Type 9 descriptions should not be used as universal compatibility standards without checking the real chain.

Browse available components in the zipper slider category.

Pre-Production Testing

  • Confirm the functional length on the finished pattern.
  • Check whether the tooth profile creates excessive stiffness.
  • Run the slider repeatedly along the full chain.
  • Check that the closed teeth do not separate behind the slider.
  • Test the insertion pin and box on open-end products.
  • Compare tape and tooth colors with the approved fabric.
  • Inspect metallic finishes after sewing and folding.

Common Manufacturing Errors

  • Do not describe molded plastic teeth as natural bone.
  • Do not filter metallic-look plastic teeth as genuine metal zippers.
  • Do not describe all separating zippers as two-way.
  • Do not mix sliders made for different tooth profiles.
  • Do not approve replacement compatibility from length alone.
  • Do not guarantee coating performance without a sample test.
  • Do not begin bulk production before approving the box, pin and slider.

Frequently Asked Questions

What are molded plastic zipper teeth made from?

They are manufactured from moulded plastic material and attached directly to textile zipper tape.

Can molded plastic zippers be used on jackets?

Yes. Open-end models are commonly used for jacket, coat and vest front closures.

Is a metallic-look molded zipper made from metal?

No. The metallic appearance is a color or finish applied to molded plastic teeth.

What is a crocodile-tooth molded zipper?

It is a molded zipper with a larger or patterned decorative tooth appearance. The elements remain plastic.

Are separating and two-way zippers the same?

No. Separating means the tapes detach completely. A two-way zipper also has two sliders and lower-opening operation.

Can a coil zipper slider be used on molded teeth?

No. Molded and coil chains use different geometries and require matching slider channels.

Last updated: July 22, 2026
Business: E-Zippers — zipper, slider and textile accessory supplier, Istanbul, Türkiye.

Stock: In Stock
The 40 cm #6 molded plastic-teeth zipper – open-end separating by E-Zippers is the perfect accent piece for designs that want to stand out. With its c..
$0.70
Add to Cart
Stock: In Stock
45 cm T6 crocodile-tooth molded plastic zipper (open-end / separating) by E-Zippers serves as a decorative and functional closure option for jackets, ..
$0.74
Add to Cart
Stock: In Stock
55 cm T6 crocodile-tooth molded plastic zipper (open-end / separating) by E-Zippers offers a decorative and functional closure option for long garment..
$0.82
Add to Cart
Stock: In Stock
60 cm T6 crocodile-tooth molded plastic zipper (open-end / separating) by E-Zippers is designed for garments and accessories requiring full separation..
$0.86
Add to Cart
Stock: In Stock
65 cm T6 crocodile-tooth molded plastic zipper (open-end / separating) by E-Zippers is crafted for outerwear bodies, coat front panels, accessory encl..
$0.90
Add to Cart
Stock: In Stock
70 cm T6 crocodile-tooth molded plastic zipper (open-end / separating) by E-Zippers offers a refined closure option for garment and accessory designs ..
$0.94
Add to Cart
Stock: In Stock
75 cm T6 crocodile-tooth molded plastic zipper (open-end / separating) by E-Zippers is created for long garment designs and accessory enclosures. The ..
$0.98
Add to Cart
Stock: In Stock
The 80 cm T6 crocodile-tooth molded plastic zipper (open-end / separating) by E-Zippers is crafted for long outerwear and accessory projects. Its croc..
$0.61
Add to Cart
Stock: In Stock
The — 85 cm T6 crocodile-tooth molded plastic zipper in an open-end / separating design — is designed to serve in outerwear production, accessory pan..
$1.06
Add to Cart
Stock: In Stock
by E-Zippers is a 90 cm T6 crocodile-tooth molded plastic zipper in an open-end / separating format. It’s crafted for outerwear, garment panels, and f..
$1.10
Add to Cart
Stock: In Stock
is a 95 cm T6 crocodile-tooth molded plastic zipper by E-Zippers, designed for outerwear and statement garment applications. The crocodile-tooth desig..
$1.14
Add to Cart
Stock: In Stock
100 cm T9 metallic-look plastic zipper (open-end / separating) by E-Zippers delivers both visual impact and robust performance. The T9 plastic teeth s..
$1.66
Add to Cart
Showing 61 to 72 of 88 (8 Pages)
Product Filter