N5 / #5 Nylon Zipper Chain Production Kit for Bags & Cases – 100 m / 328.08 ft + 50 Single-Pull Sliders ST-T10T-NAYLON-100M50C

Build zipper runs around the actual product opening

Ready-made zipper lengths are not always suitable for bags, cases, organizers and textile covers. Deep gussets, rounded corners, lining bulk, edge binding and reinforced sections can all change the actual zipper route of a finished product.

This N5 / #5 nylon zipper chain production kit provides 100 m / 328.08 ft of continuous zipper tape with 50 single-pull sliders. It is suited to small-batch bag production, case repair shops, sewing studios and makers who need a more substantial stock level than a basic sample kit.

Measure the functional zipper path before cutting

Measure from where the zipper begins operating to where it needs to stop. Do not measure the full outside perimeter of a bag or case unless that complete edge is actually part of the zipper route.

Include seam allowance, lining thickness, gusset depth, zipper guards, binding, corner turns and the intended end finish in the measurement. For repair work, place the new chain along the planned seam before cutting because older materials can stretch, shrink or shift over time.

Single-pull sliders for one main access side

The kit includes single-pull sliders. One pull tab sits on one side of the slider body, making this configuration suitable for bag tops, case lids, organizer compartments, pouches and other closures normally used from one main exterior face.

Single pull describes the pull-tab layout, not the travel direction of the zipper. A product that requires access from both sides can need a different slider configuration. Select the pull-tab style according to the finished product’s handling position and opening design.

Plan slider use before starting the batch

The supplied 50 sliders should be planned together with the available zipper-chain length. A small pouch may require one slider, while a long case, organizer panel or multi-access opening can require more.

Before cutting, record each product’s zipper length, quantity, opening direction and slider requirement. This helps control tape consumption, reduce cutting errors and show when additional chain or slider stock may be needed.

Installation checks for cleaner zipper performance

• Test one slider on a short sample of the exact zipper chain before cutting final lengths.
• Check that both sides close evenly without a visible gap behind the slider.
• Keep both zipper tapes straight and evenly tensioned while sewing.
• Leave clearance around lining, binding, gussets and reinforcement material.
• Finish both chain ends so the slider cannot leave the intended zipper route.

Choose the zipper structure for the real project

This is an N5 / #5 nylon zipper-chain system. Another construction may be needed when the project requires molded plastic teeth, metal teeth, TPU-coated tape, a smaller zipper profile or a ready-made zipper with a specific end type.

Choose the zipper according to zipper-channel width, material thickness, expected opening frequency, product load and finished appearance. A zipper that looks close in size can still be unsuitable when the chain profile or slider arrangement does not match the project.

Custom zipper requests

For a custom zipper request, provide the required chain length, zipper size, tape color, pull-tab configuration, estimated quantity, intended product type and any reference sample. These details help match the zipper-chain setup to the actual bag, case or organizer project.

Frequently Asked Questions

Is this a finished zipper with ready-to-sew ends?

No. This is continuous N5 / #5 zipper chain. The final length, slider position and end finish are prepared by the maker or workshop.

Does the kit include sliders?

Yes. The kit includes 50 single-pull sliders with 100 m / 328.08 ft of zipper chain.

Can this kit be used for bag and case repairs?

It can be suitable when the original zipper profile, sewing layout and expected use are compatible with N5 / #5 nylon zipper chain. Test a short section before completing the repair.

What does single pull mean?

It means the pull tab is located on one side of the slider body. It does not mean the zipper can move in only one direction.

Does the kit include finished end stops?

The listed contents are zipper chain and sliders. The correct end finish depends on the construction of the final bag, case or cover.

Where can I compare other zipper and slider options?

Use the Zipper Types and Models collection for zipper constructions and the Zipper Sliders collection for pull-tab styles and slider structures.