N5 / #5 Nylon Zipper Chain Kit for Bag Makers – 50 m / 164.04 ft + 25 Single-Pull Sliders ST-T10T-NAYLON-50M25C

Build zipper runs around the actual bag or case opening

Ready-made zipper lengths do not always fit the structure of a bag, organizer, equipment case or textile cover. Rounded corners, deep gussets, lining bulk, edge binding and reinforced sections can all change the real zipper route.

This N5 / #5 nylon zipper chain kit gives makers 50 m / 164.04 ft of continuous zipper tape and 25 single-pull sliders. It is suited to small-batch bag production, case repairs, sewing studios and workshops that need more material than a basic sample kit without maintaining an oversized stock roll.

Measure the functional zipper path

Measure from where the zipper begins operating to where it needs to stop. Avoid measuring the complete outer perimeter of a product unless that full edge is actually part of the zipper route.

Include seam allowance, zipper guards, lining thickness, gusset depth, binding, rounded corners and the planned end finish in the measurement. For repair work, place the new chain along the intended seam before making the final cut because older material may have stretched or shifted.

Single-pull sliders for one main access side

The included sliders have one pull tab on one side of the slider body. This setup works well for closures normally opened from one main exterior face, including bag tops, case lids, organizer compartments and pouches.

Single pull refers to the pull-tab layout, not the direction the zipper travels. A product that needs convenient access from both faces may require a different slider structure. Select the slider around actual use, handling direction and product orientation.

Plan slider allocation before cutting tape

The 25 included sliders should be planned alongside the tape length. A small pouch can use one slider, while a larger case, long organizer opening or multi-access closure can use more. Recording each item’s zipper length, quantity, opening direction and slider requirement helps keep production organized.

This approach also helps identify whether the project needs a larger set or separate tape-and-slider stock before production begins.

Installation checks before sewing

• Test one included slider on a short section of the exact zipper chain.
• Check that both sides of the chain close evenly without a gap behind the slider.
• Keep zipper tape parallel and evenly tensioned during sewing.
• Leave clearance around lining, binding, gussets and reinforcement material.
• Finish both chain ends so the slider cannot leave the intended zipper route.

Choose the right zipper construction for the project

This is an N5 / #5 nylon zipper-chain system. It may not be suitable when a project requires a smaller zipper profile, molded plastic teeth, metal teeth, TPU-coated tape or a finished ready-length zipper with a defined end structure.

Choose the zipper around zipper-channel width, fabric thickness, expected opening frequency, product load and finished appearance. A visually similar zipper can still be unsuitable when its chain profile or slider configuration does not match the product.

Custom zipper requests

For custom zipper supply, provide the required chain length, zipper size, tape color, pull-tab configuration, estimated quantity, intended product type and any reference sample. These details help match the zipper-chain kit to the real bag, case or organizer project.

Frequently Asked Questions

Is this a finished zipper with ready-to-sew ends?

No. This is continuous N5 / #5 zipper chain. The final length, slider position and end finish are prepared by the maker or workshop.

Does the kit include sliders?

Yes. The kit includes 25 single-pull sliders with 50 m / 164.04 ft of zipper chain.

Can this kit be used for bag and case repairs?

It can be suitable when the original zipper profile, sewing layout and expected use are compatible with N5 / #5 nylon zipper chain. Test a short section before completing the repair.

What does single pull mean?

It means the pull tab is located on one side of the slider body. It does not mean the zipper can travel in only one direction.

Does the kit include end stops?

The listed contents are zipper chain and sliders. The correct end finish depends on the construction of the finished bag, case or cover.

Will this zipper chain make a bag waterproof?

No. This is standard nylon zipper chain, not a waterproof or water-sealed system. Water protection depends on fabric, seams, zipper coverage and overall construction.