N3 / #3 Nylon Zipper Chain Kit for Throw Pillow & Cushion Cover Makers – 50 m / 164.04 ft + 100 Single-Pull Sliders ST-T5T-NAYLON-50M100K

For home-decor makers who need more than standard zipper lengths

Throw pillow covers and cushion covers are often made in multiple dimensions, fabrics and closure styles. A ready-made zipper may be too short, too long or unsuitable for the exact position of the opening.

This N3 / #3 nylon zipper chain kit gives home-textile makers 50 m / 164.04 ft of continuous zipper tape and 100 single-pull sliders. It is designed for repeated cover production, custom sewing orders, upholstery projects, repair work and small home-decor collections.

Prepare each zipper around the real cover opening

Measure the functional zipper path from where the zipper begins operating to where it needs to stop. Do not rely on the complete outside edge of the pillow cover unless that entire edge is the actual zipper opening.

Include seam allowance, piping, cover overlap, lining bulk, fabric thickness, corner turns and final end finishing in the measurement. Laying the chain along the intended seam before cutting helps prevent a zipper that is too short or leaves too much unused tape.

Why 100 single-pull sliders add production flexibility

The included slider quantity supports multiple made-to-length zipper runs from one chain supply. The number of finished covers depends on each opening length and on whether the design uses one slider or another slider arrangement.

Before starting a batch, record each cover style, zipper length, quantity, opening direction and slider requirement. This simple production list helps control tape use and reduces the chance of stopping work because slider stock was not planned alongside the chain.

Single-pull sliders for back-panel and one-side openings

Each supplied slider has one pull tab on one side of the slider body. This is practical for pillow and cushion covers normally opened from a back panel or one main access side.

Single pull describes the pull-tab layout, not a one-direction zipper. When a cover needs comfortable access from both faces, choose a slider structure designed for that specific handling requirement.

Test the system before cutting a full run

Before preparing multiple cover zippers, install one slider on a short section of the supplied chain. The slider should move smoothly, close both sides evenly and leave no visible gap behind it.

A similar-looking chain from another zipper family may not use the same coil profile or slider channel. Testing the actual chain-and-slider combination first is the simplest way to avoid avoidable rework during production.

Choose a zipper type around your textile design

This is an N3 / #3 nylon zipper-chain system. Where the zipper should disappear entirely into the seam, an invisible zipper may be a better fit. Heavier covers, thicker fabrics or wider zipper channels can also call for a different zipper construction.

Choose the zipper based on the cover’s fabric thickness, opening position, expected handling and finished look—not only on the zipper’s visible size.

Custom zipper-kit requests

For custom zipper supply, share the required tape length, tape color, slider configuration, estimated quantity and a sample or drawing of the final cover. This information helps match the zipper system to your project before production begins.

Frequently Asked Questions

Can I cut the chain for different throw pillow sizes?

Yes. This is continuous N3 / #3 zipper chain designed to be cut around the actual opening of each cover.

Are 100 sliders included?

Yes. The kit includes 100 single-pull sliders with 50 m / 164.04 ft of zipper chain.

Is this a complete ready-to-sew zipper?

No. The final zipper length, slider installation and end finish are prepared by the maker or workshop.

Can I use this for cushion-cover repairs?

It can be suitable when the existing zipper profile, sewing layout and intended use are compatible with N3 / #3 nylon zipper chain.

What does single pull mean?

It means the pull tab is located on one side of the slider body. It does not mean the zipper moves in only one direction.

Can I request a different tape color or kit arrangement?

Yes. Share the required tape length, color, slider style and estimated quantity so the suitable zipper-kit configuration can be evaluated for your project.